Introduction:

MESA-16E Stripping Platform System is designed and manufactured for protections on the open facades through which the forms are stripped or on which the forms are supported.

Basically, steel construction of the system consists of two or three triangular frames according to the opening and their connections.

Although Stripping Platforms are located next to each other along the facade of the building, they could be used individually according to the building facade.

Platform where the formworks are stripped and the working is realised, is composed by wooden or steel girders and wooden cover on it.

It provides high degree of protections with foldable safety nets in front and post guardrails on each sides if needed. Each individual platforms are transferred by crane.

Scope of Applications:

Although MESA-16E Stripping Platforms are generally suitable  for Half-Tunnel applications for removing the tunnel forms during stripping process, they also serve in all type of conventional construction sites where safety, limited stacking or large working areas are required.

Since the components of MESA-16E Stripping Platforms are both demountable and man-handled, the system is easily transported and transferred.

Standard Spans:

MESA-16E Stripping Platforms are easily adjusted to different spans which are arranged according to standard interior openings of Half Tunnel applications.

These openings change between 2100 – 5100 mm with 300 mm increments.

Between 5400 and 6000 mm, MESA-16E Stripping Platforms includes three triangular frames.

Standard Lengths:

Length of MESA-16E Stripping Platforms differs with three Standard Triangular Frames called as 6M, 7M and 8M having 6000, 7000 and 8000 mm total lengths respectively.

These three lengths of frames give working areas with useable dimensions from 3000 mm to 5000 mm.